Categories de productes
Product Tags
3G GSM Antenna
4G LTE Antennas
5G Built-in Antenna
5G Rod Antenna
100W PD fast charging
Amart Meter Antenna
Automotive Connectors
Circular plug connector
Connection Cable
Connector
Custom wiring harness
DC Sockets
Electronic Switch
EV wiring harness
Extension Power Cords
fast charging
FPC soft cable
Industrial Connectors
Arnès de fil mèdic
Micro Switch
Conjunts de cable sobrecarregats
PD 100W Adapter
Power Cord Cable
Power Plug Adapter
Power Plug Cable
Sensor Connection Cable
SPST Micro Switch
Steam deck
STEAM DECK 100W Adapter
Antena terminal
TYPE C
USB Data Cable
WiFi Antenna
Wire connector
Wire harness
Wireless Antenna
Wire Terminals
Therapy instrument wire button type 3.5mm massager patch electrode wire
1. Electrode board interface: stable transmission, safe use, long service life
2. Product performance: environmentally friendly material, cold resistant, anti freezing and flame-retardant, wear-resistant
3. High quality materials: strong elasticity, good flexibility, anti-interference, and more stable performance
Category: Cables mèdics

Button type one to four 3.5mm electronic massager patch electrode wire
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
Beauty device phototherapy mask, deep cleaning, wrinkle fading, fatigue relief
Instructions for using a beauty device
1. Before use, the face should be thoroughly cleaned to remove oil and dirt from the surface of the skin.
2. Choose the appropriate beauty device as needed and adjust the power to the appropriate level.
3. Cover the beauty device on your face and operate it according to the instructions in the user manual.
After use, pay attention to cleaning the beauty device and follow the instructions for maintenance.
Customized 4-pin plug TO 2.0 electrode needle * 3 therapy cable
What is the function of ECG cable? Answering this question is needed if you don’t want to regret on your decision at later stage. That’s why here you need to know about the functionalities of ECG cable.
Function of the ECG Cable
Before you start unveiling the secrets of ECG functionality, you first need to know about the same. What exactly an ECG cable is for.
Actually, an ECG patient or medical device is made for non-invasive human heart monitoring. The main objective behind this device is to diagnose heart problems in patients.
Disposable negative electrode board with pin insertion for adult therapy circuit board
1. Classified by material: Circuit negative plates can be divided into two types: metal negative plates and conductive adhesive negative plates. Metal negative plates are usually made of metals such as copper and aluminum, which have good conductivity and stability; The conductive adhesive negative electrode plate is covered with a layer of metal foil on the conductive adhesive, which has good flexibility and adhesion.
2. Classified by shape: Circuit negative plates can be divided into various shapes such as circular, square, rectangular, etc.. Different shapes of negative plates are suitable for different parts and populations.
3. Classified by purpose: The negative plate of the circuit can be divided into two types: disposable and reusable. Disposable negative plates are usually used for disposable electrocardiogram examinations and can be discarded after use; Reusable negative plates can be reused after cleaning and disinfection.
It should be noted that when using the negative electrode plate of the circuit, it is necessary to strictly follow the operating procedures and disinfection requirements to ensure the safety and accuracy of the inspection. Al mateix temps, the appropriate negative electrode plate should be selected according to the patient's condition, and installed and used correctly to avoid unnecessary risks and complications.
ECG lead wire 3.5MM three pole male elbow TO 3.5MM therapy female buckle 4.0MM buckle wire
The connector specification: 3.5mm audio male+4.0 all inclusive copper buckle with nickel plating
Conductor material: UL standard · Bare copper · Tin plated copper/Customizable conductor material
The connector plating: customized nickel plating, gold plating/salt spray 24H, salt spray 48H
Product testing: Short circuit, conductivity, insulation full inspection, brand new precision cable testing machine, reliable and safe use
OEM/ODM: Appearance, wire specifications, colors, hardware heads, etc.. can be customized and produced according to customer requirements.