Floor Scrubber Wiring Harness Supplier

760-10010-00015 7 18 Position SATA Receptacle to Receptacle 0.492′ (150.00mm, 5.906″) Red Shielded Harness;

ARC6-16-24.0-LU-LD-2-1 16 18 Position Plug to Plug 2.00′ (609.60mm) Blue Shielded Connector Cable;

ARC6-16-12.0-LU-LD-2-1 Plug to Plug 1.00′ (304.80mm) Blue Shielded Connector Cable;

5602-44-0142A-600 7 18 Position SATA Receptacle to Receptacle 1.96′ (600.00mm) Silver Connector Cable;

AE9876-ND Cable Assembly 6.56′ (2.00m) Harness Multiple Models;

0745460401 PCIe x4 plug to plug 3.28′ (1.00m) shielded connection cable green;

0745460401 PCIe x4 Male to Male 3.28′ (1.00m) Connector Cable

10, 14, 24, 140 Rectangular Cable Assembly

5602-44-0142A-600 SATA Socket to Socket 1.96′ Connector Cable

Comprehensive analysis of floor scrubber harness
I. Definition and function
The floor scrubber harness is an integrated component composed of multiple wires, connectors and protective materials, which is specially designed to provide power transmission, signal control and data interaction support for each module inside the floor scrubber, covering core functions such as motor drive, sensor feedback, and operation panel control.

II. Classification and structure
‌Classification by function‌
‌Power harness‌: Connects the battery with the motor and control module, and undertakes the core power transmission task.
‌Control harness‌: Connects the operation panel (buttons, switches) to the control unit to realize command transmission and equipment status adjustment.
‌Sensor harness‌: Integrates signal feedback lines such as water level sensors and alarm lights for real-time monitoring of clean water/sewage status.

‌Typical structural design‌
‌Modular branching‌: Including motor branching, scrubbing branching, prompt branching, jne., connecting the main line through a fulcrum to realize functional zoning and centralized management.
‌Quick-plug interface‌: Use a plug assembly to connect two sections of the harness, simplify the assembly process and improve maintenance efficiency (such as the separation design of the motor connection line and the power line).

III. Technical Features
‌Integrated design‌: Through the multi-branch common main line structure (such as the prompt branch and the control branch share the fulcrum), the cable redundancy is reduced and the stability is improved.
‌Protection optimization‌:
‌Limiting mechanism‌: A wire groove with a protective cover is set on the shell side to prevent the wire from being worn, and the seal is used to isolate water vapor and dust.
‌Reinforced connector‌: Nylon braiding or injection molding process is used to enhance the durability of the connector.
‌Intelligent expansion‌: Some wiring harnesses integrate colored lights or water level alarm functions to enhance the user interaction experience.

IV. Application scenarios
‌Power transmission‌: Provide stable power supply for motors, brushes, water suction motors, jne.
‌Control interaction‌: Supports operation panel command transmission (such as start/stop, speed regulation) and status feedback (such as insufficient clean water alarm).
‌Environmental adaptation‌: Suitable for commercial battery/wire-type floor scrubbers, suitable for high-intensity cleaning scenarios such as airports and warehouses.

ARC6-16-12.0-LU-LD-2-1 Plug to Plug Blue Connector Cable

ARC6-16-24.0-LU-LD-2-1 Plug to Plug Connector Cable

760-10010-00015 SATA Socket to Socket Cable Assemblies

5. Key points for purchase
‌Compatibility‌: Select the corresponding interface (such as quick-plug type or traditional welding type) according to the model of the floor scrubber.
‌Protection level‌: Give priority to wiring harnesses with waterproof seals and wear-resistant sheaths (IP65 and above).
‌Supplier capabilities‌: Pay attention to manufacturers with wiring harness design, mold development and full industry chain production capabilities (such as Foshan Leshun Electric).

Attachment: Patented technology examples
‌Self-positioning drag chain structure‌: By optimizing the wiring harness storage design, the reliability of long-term use in industrial scenarios is improved.
‌Combined limit mechanism‌: The split protective cover and caster structure are used to enhance the stability of the wiring harness in mobile devices.