Kategorije proizvoda
Oznake proizvoda
3G GSM antena
4G LTE antene
5G ugrađena antena
5G štap antena
100W PD brzo punjenje
Kamata Amart Amart
Automobilski priključci
Kružni čep priključak
Kabel
Priključak
Prilagođeni kabelski svežanj
DC utičnice
Elektronski prekidač
EV kabelski svežanj
Kabeli za napajanje na produžju
brzo punjenje
FPC meki kabel
Industrijski konektori
Kabel za medicinsku žicu
Mikro prekidač
Preplavljeni sklopovi kabela
PD 100W adapter
Kabel za napajanje
Adapter za napajanje
Kabel za napajanje
Kabel za priključak senzora
SPST mikro prekidač
Paluba
Pan paluba 100W adapter
Terminalna antena
Tip C
USB podatkovni kabel
WiFi antena
Žica
Žičana kabelski svežanj
Bežična antena
Žičani terminali
ECG lead wire 3.5MM three pole male elbow TO 3.5MM therapy female buckle 4.0MM buckle wire
The connector specification: 3.5mm audio male+4.0 all inclusive copper buckle with nickel plating
Conductor material: UL standard · Bare copper · Tin plated copper/Customizable conductor material
The connector plating: customized nickel plating, gold plating/salt spray 24H, salt spray 48H
Product testing: Short circuit, conductivity, insulation full inspection, brand new precision cable testing machine, reliable and safe use
OEM/ODM: Appearance, wire specifications, colors, hardware heads, itd. can be customized and produced according to customer requirements.
Category: Medicinski kabeli

Conductor:Tinned Copper Conductor/custom
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
4.0 Banana Plug TO 4.0 Electrode Female Buckle Medical Cable Therapy Spring Wire Telescopic Spiral Wire
The connector specification: 4.0mm banana plug nickel plated+4.0 all inclusive copper female buckle nickel plated
Conductor material: UL standard · Bare copper · Tin plated copper/Customizable conductor material
The connector plating: customized nickel plating, gold plating/salt spray 24H, salt spray 48H
Factory wholesale red blue light infrared light mask beauty silicone spectrum facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
Silicone negative electrode plate Electrode Conducting Resin for Electrode Therapy Lead Wire
Single-circuit negative plates are a common form of circuit negative plate, and they are integrated with conductive metal foils, which are connected to the high-frequency electrosurgical unit via a circuit. The high-frequency electrosurgical unit detects whether it is safe and compatible based on capacitance effect. When there is no negative plate in the high-frequency electrosurgical unit, the unit will sound an alarm, reminding medical staff that the negative plate is not connected. Although this single-circuit negative plate is simple, it has certain drawbacks; it can only detect whether the circuit negative plate is connected, but not whether the negative plate is connected to the skin and effective.
Wholesale electrode conversion wire 2.0 hole to 1.5 pin plug type self-adhesive therapy electrode sheet tail wire
1. Electrode board interface: stable transmission, safe use, long service life
2. Product performance: environmentally friendly material, cold resistant, anti freezing and flame-retardant, wear-resistant
3. High quality materials: strong elasticity, good flexibility, anti-interference, and more stable performance