Amart 미터 안테나 란 무엇입니까?? 기능 및 응용

Analysis of Smart Meter Antenna Technology (2025)
1. Core Types and Design Features
‌Communication Antenna Type‌
‌Remote Communication Antenna‌: Patented design (such as Hangzhou Tianzhuo CN 119029523 비) supports remote signal transmission and adapts to the low-power wide area network (LPWAN) requirements of smart meters.
‌Miniaturized Integrated Antenna‌: Such as the Ignion DUO mXTEND™ solution, which achieves multi-band integration (Sub-1GHz/2.4GHz) through a miniature PCB antenna, reduces the volume by more than 50%, and adapts to the high-voltage environment inside the meter.
‌Specialized Band Antenna‌: 433MHZ, 470MHz and other frequency band antennas (Huaxin brand) use suction cups or rubber stick structures, with a gain range of 3dBi to 12dBi, and are suitable for wireless meter reading scenarios of water meters and electricity meters.
Various types of smart meter antennas exist, including omnidirectional antennas, directional antennas, and virtual antennas.

방수 전방향성 4G 스마트 미터 안테나

Smart Meter LTE Antenna Ultra-Thin 690 MHz ~ 960 MHZ, 1710 MHz ~ 2700 MHZ

Low profile smart meter omnidirectional antenna for indoor and outdoor use

‌Structural optimization‌
‌Electronic tag antenna‌: Planar design (patent CN 7020), through the optimization of the oscillator layout to improve the radio frequency identification (RFID) 성능, thickness ≤1mm, to meet the compact space requirements of smart meters.

2. Anti-interference and reliability technology
‌Electromagnetic shielding‌: Adopting a multi-layer shielding cover + pressurized sealing structure, the internal air pressure is higher than the external pressure, reducing the leakage of high-frequency electromagnetic waves (Qingdao Qiancheng patent CN119986120A), and reducing the signal error rate by 40%.
‌RF isolation‌: The antenna is physically isolated from the metering module, combined with the differential signal transmission design, to reduce the interference of power electronic components, and the metering accuracy deviation is ≤0.1%.
‌Power supply optimization‌: Direct DC power supply + filtering circuit, reducing the interference of the switching power supply on the antenna sensitivity (the measured sensitivity is increased by 15dBm), and the communication stability is improved by 30%.

3. Typical debugging and installation points
‌Influence of adapter‌: Removing the SMA adapter can reduce insertion loss (typical value 0.5dB), and directly welding the IPX interface can improve signal integrity.
‌Cable layout‌: The antenna feeder is far away from the power line, and the bending radius is ≥50mm to avoid impedance mutation and deterioration of the standing wave ratio (standard requirement ≤1.5).
‌Environmental adaptation‌: Outdoor meter antennas require IP67 protection + lightning protection grounding (grounding resistance ≤4Ω) to ensure reliability in extreme weather.

4. Industry application evolution
‌NB-IoT and 4G integration‌: The external antenna tends to be concealed and integrated with the meter housing, supporting seamless switching of dual-mode communication (NB-IoT+4G Cat.1).
‌Breakthrough in high-voltage scenarios‌: Antenna components adapted to power distribution environments above 20kV, with a ceramic substrate and air dielectric layer design, the withstand voltage level is increased to AC 3000V.

GPS Passive Rubber Antenna with Sma Male Connector

DiPole 3G, 4G, LTE Smart Meter Dipole Antenna

1575.42MHz GPS Rubber Antenna for Smart Meter Reading

5. Technology Development Trends
Smart meter antennas enable the remote communication of energy usage data between the smart meter and the utility company’s network.
The antenna transmits radio signals carrying the meter’s readings to a receiver, which then relays the information to the utility’s systems.
Smart meter antennas are typically placed on the outside of the meter box or device.
They operate within specific radio frequency bands, usually in the sub-GHz or 2.4 GHz range, depending on the specific protocol used by the smart meter.
‌Smart antenna technology‌: Introducing space division multiplexing (SDMA) and adaptive beamforming to improve spectrum utilization in dense deployment scenarios.
‌Fully automated debugging‌: The antenna parameter self-calibration system based on AI algorithm improves debugging efficiency by 50% and adapts to the needs of flexible production lines.
‌High frequency extension‌: Supports 600MHz-3.5GHz broadband coverage to meet the needs of new communication protocols such as 5G RedCap in the future.