4.0 Palam pisang ke 4.0 Elektrod Perubatan Kabel Perubatan Terapi Kabel Spring Wire Teleskopik Spiral Wire

Classification of surface electrodes for mid low frequency therapy Surface electrodes for mid low frequency therapy can be classified according to their shape, saiz, bahan, dan aspek lain. Berikut adalah beberapa kaedah klasifikasi biasa: 1. Klasifikasi bentuk: Bentuk elektrod permukaan termasuk lembaran, bulatan, Dataran, Ellipse, dll. Bentuk elektrod yang berbeza sesuai untuk bahagian rawatan yang berlainan, seperti elektrod lembaran untuk rawatan besar-besaran, elektrod bulat untuk rawatan tempatan, dll 2. Klasifikasi saiz: Saiz elektrod permukaan biasanya diwakili oleh diameter atau panjang sampingan. Saiz elektrod yang berbeza sesuai untuk rawatan yang berbeza, seperti elektrod kecil untuk rawatan tempatan dan elektrod besar untuk rawatan besar-besaran. 3. Klasifikasi bahan: Bahan elektrod permukaan terutamanya termasuk logam, serat karbon, silikon, dll. Bahan -bahan elektrod yang berbeza mempunyai kekonduksian dan julat aplikasi yang berbeza. Contohnya, Elektrod logam mempunyai kekonduksian yang baik dan sesuai untuk terapi frekuensi tinggi, Walaupun elektrod serat karbon sesuai untuk terapi frekuensi rendah, dll 4. Klasifikasi kuantiti: Bilangan elektrod permukaan biasanya termasuk elektrod unipolar dan elektrod bipolar. Elektrod monopolar sesuai untuk laman web rawatan tunggal, Walaupun elektrod bipolar sesuai untuk rawatan di antara dua tapak rawatan. It should be noted that selecting appropriate surface electrodes requires evaluation and selection based on the patient's condition and treatment needs, Walaupun mengikuti prosedur operasi yang berkaitan dan langkah berjaga -jaga keselamatan untuk memastikan keberkesanan rawatan maksimum.

Step 1: Use facial mask 1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth. 2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb. Step 2: Wear a red light mask 3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated. 4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly. 5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose. Step 3: Adjust the red light mode and power 6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light. 7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level. Step 4: Use a red light mask 8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading Step 5: End of use 11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time. 12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place. 13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.