English
العربية
bosanski jezik
Български
Català
粤语
中文(漢字)
Hrvatski
Čeština
Dansk
Nederlands
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
עברית
Magyar
Italiano
日本語
한국어
Latviešu valoda
Bahasa Melayu
Norsk
پارسی
Polski
Português
Română
Русский
Cрпски језик
Slovenčina
Slovenščina
Español
Svenska
தமிழ்
ภาษาไทย
Tiếng Việt
4.0 Bananplugg TO 4.0 Elektrod hona spänne medicinsk kabel terapi fjäder tråd teleskopisk spiral tråd
Anslutningsspecifikationen: 4.0mm bananplugg nickelpläterad+4,0 all inclusive koppar honspänne nickelpläterad
Ledarmaterial: UL-standard · Bar koppar · Tennpläterad koppar/Anpassningsbart ledarematerial
Kontaktplätering: skräddarsydd nickelplätering, guldplätering/saltspray 24H, saltspray 48H
Längd, färg, och plugg kan alla anpassas
Kontakta oss
Väntar på ditt mejl, vi kommer att svara dig inom 12 timmar med värdefull information du behövde.
RELATERADE PRODUKTER
Beauty device phototherapy mask, deep cleaning, wrinkle fading, fatigue relief
Instructions for using a beauty device
1. Before use, the face should be thoroughly cleaned to remove oil and dirt from the surface of the skin.
2. Choose the appropriate beauty device as needed and adjust the power to the appropriate level.
3. Cover the beauty device on your face and operate it according to the instructions in the user manual.
After use, pay attention to cleaning the beauty device and follow the instructions for maintenance.
Factory wholesale red blue light infrared light mask beauty silicone spectrum facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
Magnetic buckle electrode wire 5P DIN TO 3.5mm magnetic buckle lead wire
Ledarmaterial: UL standard · Bare copper · Tin plated copper/Customizable conductor material
The connector plating: skräddarsydd nickelplätering, guldplätering/saltspray 24H, salt spray 48H
Product testing: Kortslutning, ledningsförmåga, isolering full inspektion, helt ny precisionskabeltestmaskin, reliable and safe use
OEM/ODM: Utseende, trådspecifikationer, färger, hårdvaruhuvuden, etc. kan skräddarsys och produceras efter kundens önskemål