English
العربية
bosanski jezik
Български
Català
粤语
中文(漢字)
Hrvatski
Čeština
Dansk
Nederlands
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
עברית
Magyar
Italiano
日本語
한국어
Latviešu valoda
Bahasa Melayu
Norsk
پارسی
Polski
Português
Română
Русский
Cрпски језик
Slovenčina
Slovenščina
Español
Svenska
தமிழ்
ภาษาไทย
Tiếng Việt
美容儀光療面膜, 深度清潔, 皺紋淡化, 緩解疲勞
美容儀使用說明
1. 使用前, 應徹底清潔面部，去除皮膚表面的油脂和污垢.
2. 根據需要選擇合適的美容儀，並將功率調整到合適的水平.
3. 把美容儀蓋喺臉上，並按照用戶手冊中嘅說明進行作.
使用後, 注意清潔美容儀並按照說明進行維護.
Phototherapy in beauty devices can effectively improve skin problems such as acne, aging, 等. From a technical perspective, different wavelengths of light can affect skin layers at different depths, improving internal skin problems and making the skin surface more beautiful.
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
Factory wholesale red blue light infrared light mask beauty silicone spectrum facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
USB A TO 4.0mm snap button one to two ECG snap button therapy massage lead wire
ECG cable is considered as the most important medical cable. If you are going to choose ECG cables, you first need to grab information about the same. It means that you need to learn how it actually works.
心電電纜嘅作用係乜嘢? 如果你唔想喺以後對自己嘅決定感到後悔，則需要答呢個問題. 就係點解喺呢度你需要了解心電圖電纜嘅功能.
心電圖電纜嘅功能
喺開始揭開ECG功能嘅秘密之前, 你首先需要了解相同嘅内容. 心電圖電纜究竟係做乜嘢用嘅.
講真, 心電圖患者或醫療設備用于無創人類心臟監測. 該設備嘅主要目的係診斷患者的心臟問題.
Now, come to the main thing i.e. ECG cables. 講真, this cable is connected to electrodes. These electrodes are positioned on specific areas on patient’s body to monitor and detect the electrical activity of the heart.
The main function of ECG cable is to transmit the electrical activity of heart back to connected ECG device. Now, the device produces result, which is analysed and diagnosed by doctors or other medical professionals for potential hear problems.
Wire Harness for High Frequency Scalpel (Disposable Medical Devices)
The high-temperature resistant wire harness is made of special high-temperature insulation materials and high-temperature resistant wires, WHMA (Wire Harness Manufacturers Association) issued IPC/WHMA-A-620 Class III, the single industry-wide standard for manufacturing, using, and installing cable and wire harness assemblies. MIL-STD-454 is the industry standard for electronic equipment for military use cases.