產品分類
產品標籤
3G GSM Antenna
4G LTE Antennas
5G Built-in Antenna
5G Rod Antenna
100W PD快充
Amart Meter Antenna
汽車連接器
圓形插頭連接器
連接電纜
連接器
定製線束
DC插座
電子掣
電動汽車線束
延長電源線
快速充電
FPC軟電纜
工業連接器
醫用線束
微動開關
包覆成型電纜組件
PD 100W適配器
電源線電纜
電源插頭適配器
電源插頭電纜
傳感器連接電纜
SPST微動掣
蒸汽甲板
STEAM DECK 100W適配器
Terminal Antenna
C型
USB數據綫
WiFi Antenna
Wire connector (線連接器)
線束
Wireless Antenna
Wire Terminals
ECG lead wire 3.5MM three pole male elbow TO 3.5MM therapy female buckle 4.0MM buckle wire
連接器規格: 3.5mm audio male+4.0 all inclusive copper buckle with nickel plating
導體材料: UL標準· 裸銅· 鍍錫銅/可定製的導體材料
連接器電鍍: 定製鍍鎳, 鍍金/鹽霧24H, 鹽霧48H
Product testing: Short circuit, conductivity, insulation full inspection, brand new precision cable testing machine, reliable and safe use
OEM/ODM: Appearance, wire specifications, colors, hardware heads, 等. can be customized and produced according to customer requirements.
Category: 醫用電纜

Conductor:Tinned Copper Conductor/custom
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
Disposable neutral electrode plate, high-frequency electric knife negative electrode plate
Disposable neutral negative electrode and high-frequency electrode. Using imported materials, it has excellent anti allergy and conductivity, and will not cause any irritation to young skin. It has superior conductivity and is compatible with various brands of RF beauty devices. The product uses imported adhesive to enhance the breathability of the wing protection material, greatly improving the firmness of the electrode sheet adhesion
Red blue light household face LED color light infrared silica gel facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
USB A TO 4.0mm snap button one to two ECG snap button therapy massage lead wire
ECG cable is considered as the most important medical cable. If you are going to choose ECG cables, you first need to grab information about the same. It means that you need to learn how it actually works.
心電電纜嘅作用係乜嘢? 如果你唔想喺以後對自己嘅決定感到後悔,則需要答呢個問題. 就係點解喺呢度你需要了解心電圖電纜嘅功能.
心電圖電纜嘅功能
喺開始揭開ECG功能嘅秘密之前, 你首先需要了解相同嘅内容. 心電圖電纜究竟係做乜嘢用嘅.
講真, 心電圖患者或醫療設備用于無創人類心臟監測. 該設備嘅主要目的係診斷患者的心臟問題.
Now, come to the main thing i.e. ECG cables. 講真, this cable is connected to electrodes. These electrodes are positioned on specific areas on patient’s body to monitor and detect the electrical activity of the heart.
The main function of ECG cable is to transmit the electrical activity of heart back to connected ECG device. Now, the device produces result, which is analysed and diagnosed by doctors or other medical professionals for potential hear problems.