English
العربية
bosanski jezik
Български
Català
粤语
中文(漢字)
Hrvatski
Čeština
Dansk
Nederlands
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
עברית
Magyar
Italiano
日本語
한국어
Latviešu valoda
Bahasa Melayu
Norsk
پارسی
Polski
Português
Română
Русский
Cрпски језик
Slovenčina
Slovenščina
Español
Svenska
தமிழ்
ภาษาไทย
Tiếng Việt
產品
Factory wholesale red blue light infrared light mask beauty silicone spectrum facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
Floor Scrubber Wiring Harness Supplier
The floor scrubber harness is an integrated component composed of multiple wires, connectors and protective materials, which is specially designed to provide power transmission, signal control and data interaction support for each module inside the floor scrubber, covering core functions such as motor drive, sensor feedback, and operation panel control.
For Apple,Garmin Fenix7 6S 6 Sq Garmin Watch Charging Adapter
Safe charging, not easy to get hot
Quick charging, keep the watch fully charged at any time,
Good heat dissipation performance
No heating after long-term use
High-precision copper core contacts, plug and play, no need to wait
Suitable for Garmin smart watch charging
Various styles, choose at will
Product name: Garmin smart watch adapter
Material: aluminum alloy, PVC
Input: Type-c, Micro, Linghtning
Output: Garmin watch connector
Applicable: Garmin smart watch
FPC soft 240w board cable is compatible with Thunderbolt 5 protocol bidirectional 80gbps transmission
Compatible with Thunderbolt 5
120Gb bandwidth improvement
80Gbps data transmission
Dual 6K/8K displays
Mac Mini (M1-M4) connection
240W high-power transmission
Full-function high-speed flexible board cable all-round USB4 2.0
High-speed transmission USB4 2.0
120Gbps rate
One-way transmission)
Not only fast charging, but also faster transmission, easy to transfer large files in seconds
Multiple application scenarios
Fully charged anytime, anywhere
Extreme transmission
120Gbps one-way data transmission 80Gbps two-way transmission
UHD projection
16K@30Hz/8K@60Hz projection
Fast charging
PD3.1 super fast charging 240W high-power power supply
Wire core
Designed with FPC material with extremely high signal transmission
Stability and anti-interference ability
Ensure lossless data transmission
At the same time, it can resist bending
Pulling and other use pressures
Maintain consistent performance
E-MARKER smart chip
Upgraded smart E-marker The chip can automatically identify your device to match the current required for fast charging, and will automatically stop charging when the device is fully charged to prevent overcharging from damaging the device's battery, making your charging safer and more efficient.
Function and Production of Automobile Wiring Harness
The primary function of an automobile wiring harness is to efficiently transmit electrical power and signals between the vehicle's electrical components, ensuring the proper functioning of various systems. Production of wiring harnesses involves design, prototyping, assembly, and rigorous testing to ensure reliability and safety.
Function and Production of Smart Home Antenna
Smart home antennas facilitate wireless communication by enabling smart devices to transmit and receive radio frequency signals, forming the backbone of connected home ecosystems. Production methods for these antennas include fabric-based embroidery, polymer embedding, microfluidic techniques, and additive manufacturing like 3D printing.
Function and Production Sesign of Controller Antenna
A controller antenna functions as both a transmitter and receiver of electromagnetic waves, crucial for connecting wireless devices. Its production design involves careful consideration of antenna type, 大小, 材料, impedance matching, and integration with the controller's PCB, aiming for optimal signal transmission and reception.
Functional Production of Wiring Harnesses for Medical Devices
Functional production of wiring harnesses for medical devices involves a precise, quality-controlled process that blends automation and manual assembly. It includes cutting, stripping, crimping, and terminating wires, followed by routing, bundling, and testing for electrical functionality and durability, with special attention to sterilization-ready designs and biocompatible materials.
Functions and Applications of Flat Cable Assemblies
Flat cable assemblies are used in various electrical and electronic applications to provide efficient and organized wiring systems. They offer a compact and flexible way to manage multiple conductors, often used in consumer electronics, industrial equipment, and more. Flat cables, also known as ribbon cables or flexible flat cables, are characterized by their flat, ribbon-like shape and offer advantages like space savings, lightweight design, and improved flexibility compared to round cables.