English
العربية
bosanski jezik
Български
Català
粤语
中文(漢字)
Hrvatski
Čeština
Dansk
Nederlands
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
עברית
Magyar
Italiano
日本語
한국어
Latviešu valoda
Bahasa Melayu
Norsk
پارسی
Polski
Português
Română
Русский
Cрпски језик
Slovenčina
Slovenščina
Español
Svenska
தமிழ்
ภาษาไทย
Tiếng Việt
心電導聯線3.5MM 三極公彎頭TO 3.5MM治療母扣4.0MM扣線
連接器規範: 3.5mm audio male+4.0 all inclusive copper buckle with nickel plating
導體材料: UL標準·裸銅·鍍金銅/可自定義的導體材料
連接器電鍍: 定制的鎳電鍍, 金鍍金/鹽噴霧24小時, 鹽噴48h
產品測試: 短路, 電導率, 絕緣全檢, 全新精密電纜測試機, 使用可靠、安全
OEM/ODM: 外貌, 電線規格, 顏色, 硬件頭, ETC. 可根據客戶要求定制生產.
Conductor:Tinned Copper Conductor/custom
聯繫我們
等待您的電子郵件, 我們會在裡面回复您 12 需要您需要的寶貴信息的小時.
相關產品
成人治療電路板的插入銷釘的一次性負電極板
1. 由材料分類: 電路負板可以分為兩種類型: 金屬負板和導電粘合劑負板. 金屬負板通常由銅和鋁等金屬製成, 具有良好的電導率和穩定性; 導電性粘合劑負電極板在導電粘合劑上覆蓋一層金屬箔, 具有良好的靈活性和粘附.
2. 按形狀分類: 電路負板可以分為各種形狀，例如圓形, 正方形, 矩形的, ETC. 負板的不同形狀適用於不同的零件和種群.
3. 通過目的分類: 電路的負板可以分為兩種類型: 一次性和可重複使用. 一次性負板通常用於一次性心電圖檢查，並且可以在使用後丟棄; 可重複使用的負板可以在清潔和消毒後重複使用.
應該注意的是，當使用電路的負電極板時, 有必要嚴格遵循操作程序和消毒要求，以確保檢查的安全性和準確性. 同時, 應根據患者病情選擇合適的負極板, 並正確使用並正確使用以避免不必要的風險和並發症.
Factory wholesale red blue light infrared light mask beauty silicone spectrum facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.