English
العربية
bosanski jezik
Български
Català
粤语
中文(漢字)
Hrvatski
Čeština
Dansk
Nederlands
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
עברית
Magyar
Italiano
日本語
한국어
Latviešu valoda
Bahasa Melayu
Norsk
پارسی
Polski
Português
Română
Русский
Cрпски језик
Slovenčina
Slovenščina
Español
Svenska
தமிழ்
ภาษาไทย
Tiếng Việt
矽膠負極板 電極治療用電極導電樹脂 導線
單迴路負極板是迴路負極板的常見形式, 它們與導電金屬箔集成在一起, 通過電路連接到高頻電外科設備. 高頻電刀基於電容效應檢測是否安全兼容. 當高頻電刀內無負極板時, 該裝置將發出警報, 提醒醫護人員負極板未連接. 雖然這個單路負極板很簡單, 它有一定的缺點; 只能檢測電路負極板是否連接, 但不知道負極板是否與皮膚連接有效.
The negative plate refers to the electrode with a negative potential in a battery, also known as the neutral electrode, negative electrode plate, hand-held negative plate for beauty devices, electrode plate, electrosurgical circuit board, patient plate, ESU grounding plate, and electrosurgical knife accessory. It is widely used in electrosurgery and is paired with various high-frequency electrosurgical units and RF devices to form a circuit with the positive electrode of the electrosurgical unit. 通常, it serves as the negative pole during cutting and coagulation in electrosurgical procedures.
聯繫我們
等待您的電子郵件, 我們會在裡面回复您 12 需要您需要的寶貴信息的小時.
相關產品
Red blue light household face LED color light infrared silica gel facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.