產品
便攜式迷你手電筒手機充電器Type-C電源
型電源
無需收費
迷你高強度手電筒
充電能力: 5v@0.2a 1W
輸出: 210-230 流明
沒有電池設計, 沒有充電的擔憂
沒有充電的擔憂, 沒有電池壽命焦慮, 插件, 便於使用
小而便攜, 隨身攜帶
輕巧和緊湊的身體, 可以輕鬆地放在口袋裡並隨身攜帶
低功耗和較長的電池壽命, 穩定的輸出而無需降低功率
10% 手機電源照明 45-55 分鐘, 手機充滿電的燈光 6-8 小時
隨身攜帶您輕鬆應對黑暗
為老年人增加視力降低的保證, 放學後獨自回家的孩子, 和你自己下班遲到的人
鋁合金殼具有抗壓和抗壓
帶有鞘, 它在幾秒鐘內變成柔和的光線
連接到移動電源
使用各種充電設備
可以通過type-c接口連接, 任何用Cype-C的電源都可以為此充電
快速桿連接電氣接頭套件和緊湊型內聯端子
槓桿鎖快速連接端子塊設計用於 28 到 12 測量線徑且設計緊湊.
這是傳統接線螺母的替代解決方案,可創建更快、更安全的接線. 插入剝開的電線並關閉橙色控制桿以固定電線並在其他端子之間建立公共連接, 無需工具. 降低控制桿以連接電線,抬起控制桿以斷開連接. 價格為每個.
Rectangular Connector Cable Harness Assemblies
伺服線束製造涉及創建用於精確定位和移動的專用線束, 主要用於工業自動化. 這些線束, 常與伺服電機一起使用, 為執行器提供受控電氣連接, 確保動作準確且可重複. 在製造方面, 伺服線束通過切割組裝, 剝離, 捲邊, 焊接, 和佈線, 通常使用自動化設備來提高效率和質量.
Red blue light household face LED color light infrared silica gel facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
RF連接器電纜, 電線線束組件中國供應商
RF connectors and cables are core components in the fields of wireless communication, aerospace, military equipment, ETC。, and their technological development is closely related to application scenarios. The following is an explanation from the aspects of structural characteristics, connection methods, application fields and technological progress:
RJ45 1 男至 4 母 LAN 以太網插座端口分路器以太網電纜
描述:
全新、高品質.
採用鍍金線芯,保證信號傳輸.
PCB內置導電電路,防止導體損壞.
可防護外界電磁信號的干擾,避免破壞網絡信號.
使用此分線器可以將三根網絡電纜連接到更長的電纜.
允許筆記本電腦訪問不同房間的以太網, 無需從另一個房間拉電纜
到房間連接到那台計算機
您將以太網線從牆壁連接到分路器電纜, 一個從分配器到計算機 (或筆記本電腦,
一個從分配器到另一台計算機 (或筆記本電腦).
規格:
模型: RJ45
材料: ABS + 銅
數量: 1個人電腦
長度: 7.9 英寸 (0.2m)
黑色
搖桿開關DPDT/DPST開關 6/4 引腳3A〜30A 250VAC/125VA
這是當前大型重型DPDT/DPST搖桿開關, 開關等級為30a 250VAC. 因此,開關可以在3A上很好地使用, 6一個, 10一個, 15一個, 16一個, 20一個, 25一個, 30a at 120 伏特或 240 伏特.
我國線對線連接器的選型及作用
多種線對線連接器類型, 無論您需要的是 2 針還是 4 針線對線連接器, 由亞迅提供最高品質並符合ROHS標準和其他安全監管標準. 亞迅的線對線連接器在中國製造,也為您提供盡可能低的價格. 是否是JST, molex, 您正在尋找的 Amp 或杜邦線對線連接器, 我們可以提供!
選擇JST連接器和電子線束應用程序
JST連接器是按照J.S.T最初制定的設計標準製造的電連接器. 製造商. 鈷. (日本壓接端子).
JST公母連接器電纜, 升級JST-PH 2.0 連接器, 銷釘不會輕易鬆動.
8x LED 燈帶跳線, 10x 無間隙連接器,12x L 形連接器, 2x T 形連接器, 1x 2 方式 RGBW 分配器電纜,2X 4 帶裸線端子的插針母連接器,20x 4 針式公對公連接器,20x LED 燈帶夾
適用於JRC H36 H67等小型百日咳升級刀片Inductrix, E010 E013, 和 KingKong Tiny 無人機
伺服線束功能設計與製造
伺服線束製造涉及創建用於精確定位和移動的專用線束, 主要用於工業自動化. 這些線束, 常與伺服電機一起使用, 為執行器提供受控電氣連接, 確保動作準確且可重複. 在製造方面, 伺服線束通過切割組裝, 剝離, 捲邊, 焊接, 和佈線, 通常使用自動化設備來提高效率和質量.
English
العربية
bosanski jezik
Български
Català
粤语
中文(漢字)
Hrvatski
Čeština
Dansk
Nederlands
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
עברית
Magyar
Italiano
日本語
한국어
Latviešu valoda
Bahasa Melayu
Norsk
پارسی
Polski
Português
Română
Русский
Cрпски језик
Slovenčina
Slovenščina
Español
Svenska
தமிழ்
ภาษาไทย
Tiếng Việt