English
العربية
bosanski jezik
Български
Català
粤语
中文(漢字)
Hrvatski
Čeština
Dansk
Nederlands
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
עברית
Magyar
Italiano
日本語
한국어
Latviešu valoda
Bahasa Melayu
Norsk
پارسی
Polski
Português
Română
Русский
Cрпски језик
Slovenčina
Slovenščina
Español
Svenska
தமிழ்
ภาษาไทย
Tiếng Việt
產品
廠家批發紅藍光紅外光面膜美容矽膠光譜面膜儀
步 1: 使用面膜
1. 敷面膜: 選擇適合自己膚質的面膜產品, 均勻地塗抹在臉上, 並避開眼睛和嘴巴.
2. 等待吸收: 按照面膜說明書上的時間要求, 等待面膜完全滲透吸收.
步 2: 佩戴紅光面罩
3. 打開紅光面罩: 按下下面的開關按鈕，確保紅光面罩被激活.
4. 戴上口罩: 將面膜從上到下輕輕敷在臉上, 確保面部皮膚緊密貼合.
5. 固定式面罩: 根據口罩上固定帶的鬆緊程度調整合適的固定位置，確保口罩穩定不鬆動.
步 3: 調整紅燈模式和功率
6. 選擇紅燈模式: 根據您的需求, 選擇面罩上對應的按鈕即可切換不同的紅光模式. 一般有紅光照射等模式, 紅燈閃爍, 以及交替的紅光和藍光.
7. 調節紅光功率: 根據您的皮膚敏感度, 調節面罩上的電源按鈕並選擇合適的紅光功率級別.
步 4: 使用紅光面罩
8. 開始使用: 按下面面罩上的開始按鈕, 紅光罩將開始工作. 9. 曝露時間: 根據產品說明書的建議設置合適的紅光面使用時間. 一般建議將其用於 15-30 每次幾分鐘. 10. 放鬆休息: 在紅光錶面工作時, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: 使用結束
11. 定時關機: 確保紅光面罩在使用時間結束後按下下方的關機按鈕關閉.
12. 取下面罩: 小心地將紅光面罩從臉上取下並放置在乾淨的地方.
13. 面部護理: 用清水洗臉, 然後塗抹適當的面霜或乳液進行面部護理和鎖水.
對於蘋果,Garmin Fenix7 6s 6 SQ Garmin手錶充電適配器
安全充電, not easy to get hot
Quick charging, 隨時保持手錶充滿電,
Good heat dissipation performance
No heating after long-term use
High-precision copper core contacts, 插件, no need to wait
Suitable for Garmin smart watch charging
Various styles, choose at will
Product name: Garmin smart watch adapter
Material: 鋁合金, PVC
Input: type-c, 微, Linghtning
Output: Garmin watch connector
Applicable: Garmin智能手錶
FPC軟240W板電纜與Thunderbolt兼容 5 協議雙向80Gbps傳輸
與雷電兼容 5
120Gb bandwidth improvement
80Gbps data transmission
Dual 6K/8K displays
Mac Mini (M1-M4) connection
240W high-power transmission
Full-function high-speed flexible board cable all-round USB4 2.0
高速變速箱USB4 2.0
120Gbps rate
One-way transmission)
不僅快速充電, 但也更快的傳輸, easy to transfer large files in seconds
Multiple application scenarios
Fully charged anytime, anywhere
Extreme transmission
120Gbps one-way data transmission 80Gbps two-way transmission
UHD projection
16K@30Hz/8K@60Hz projection
Fast charging
PD3.1 super fast charging 240W high-power power supply
Wire core
Designed with FPC material with extremely high signal transmission
Stability and anti-interference ability
Ensure lossless data transmission
At the same time, it can resist bending
Pulling and other use pressures
Maintain consistent performance
E-MARKER smart chip
Upgraded smart E-marker The chip can automatically identify your device to match the current required for fast charging, 並在設備充滿電時自動停止充電，防止過度充電損壞設備電池, 使您的充電更安全，更高效.