English
العربية
Български
Čeština
Dansk
Nederlands
Suomi
Français
Deutsch
Magyar
Italiano
日本語
한국어
Português
Română
Русский
Slovenščina
Español
Svenska
Tiếng Việt
Therapy instrument wire button type 3.5mm massager patch electrode wire
1. Electrode board interface: stable transmission, safe use, long service life
2. Product performance: environmentally friendly material, cold resistant, anti freezing and flame-retardant, wear-resistant
3. High quality materials: strong elasticity, good flexibility, anti-interference, and more stable performance
Button type one to four 3.5mm electronic massager patch electrode wire
Contactez-nous
En attente de votre email, nous vous répondrons dans les 12 heures avec des informations précieuses dont vous aviez besoin.
PRODUITS CONNEXES
4.0 Fiche banane à 4.0 Fil à ressort de thérapie de câble médical de boucle femelle d'électrode fil en spirale télescopique
La spécification du connecteur: 4.0mm banana plug nickel plated+4.0 all inclusive copper female buckle nickel plated
Conductor material: UL standard · Bare copper · Tin plated copper/Customizable conductor material
The connector plating: nickelage personnalisé, dorure/brouillard salin 24H, brouillard salin 48H
Factory wholesale red blue light infrared light mask beauty silicone spectrum facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
Silicone negative electrode plate Electrode Conducting Resin for Electrode Therapy Lead Wire
Single-circuit negative plates are a common form of circuit negative plate, and they are integrated with conductive metal foils, which are connected to the high-frequency electrosurgical unit via a circuit. The high-frequency electrosurgical unit detects whether it is safe and compatible based on capacitance effect. When there is no negative plate in the high-frequency electrosurgical unit, the unit will sound an alarm, reminding medical staff that the negative plate is not connected. Although this single-circuit negative plate is simple, it has certain drawbacks; it can only detect whether the circuit negative plate is connected, but not whether the negative plate is connected to the skin and effective.
Wire Harness for High Frequency Scalpel (Disposable Medical Devices)
The high-temperature resistant wire harness is made of special high-temperature insulation materials and high-temperature resistant wires, WHMA (Wire Harness Manufacturers Association) issued IPC/WHMA-A-620 Class III, the single industry-wide standard for manufacturing, using, and installing cable and wire harness assemblies. MIL-STD-454 is the industry standard for electronic equipment for military use cases.