English
العربية
bosanski jezik
Български
Català
粤语
中文(漢字)
Hrvatski
Čeština
Dansk
Nederlands
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
עברית
Magyar
Italiano
日本語
한국어
Latviešu valoda
Bahasa Melayu
Norsk
پارسی
Polski
Português
Română
Русский
Cрпски језик
Slovenčina
Slovenščina
Español
Svenska
தமிழ்
ภาษาไทย
Tiếng Việt
USB 3.0 right angled elbow to Micro B 3.0 industrial camera data cable
The Micro USB end comes with M2 screws, which can be locked onto the panel
Used for connecting USB 3.0 devices, it is backward compatible with USB 2.0
Standard USB3.0 28/28AWG cable with three layers of shielding (one core layer and two outer layers) to prevent signal interference
Other lengths can be customized according to requirements
The USB 3.0-A male terminal can connect to the USB 3.0 vai 2.0 interface of the host. Piemēram, a motherboard or PC card
The USB 3.0 Micro B male terminal can be connected to OTG devices with USB 3.0 vai 2.0 interfaces. Piemēram, hard drive cases, mobile phones
100cm USB 3.0 Micro B male to USB A male cable
Sazinieties ar mums
Gaidot jūsu e -pastu, Mēs jums atbildēsim 12 stundas ar nepieciešamo vērtīgo informāciju.
RELATED PRODUCTS
USB 3.0 AM with M3 fixed screw to micro B with fixed screw M2 digital device data charging cable
Gold plated elbow USB 3.0 AM with M3 fixed screw to micro B with M2 fixed screw for digital device data charging cable 0.3 meters;
1. Transmission rate: 5GPps or above; Backward compatibility with USB 2.0 un 1.1 versions;
USB 3.0 is a full duplex, four-way differential signal independent of USB 2.0 signal, supporting simultaneous bidirectional data transmission;
3: Product application and function: Supports WINDOWS2003/2007/XP/Vista/WIN7/WIN8, plug and play, and hot plugging; Higher power, faster charging, easy to drive related devices; Suitable for devices with large capacity file bidirectional bright speed transfer, such as computers, portable hard drives, USB drives, HUBs, card readers, cameras, mobile phones, and other portable mobile devices
4: USB AM headband with double screws: LP-4.2 * 29MM-M3 * 0.5
USB Micro B headband with single screw: M2x24.8mm
USB 3.0 right angled bend to Micro B 3.0 9-core high-speed tinned copper wire with screws for fixation
The Micro USB end comes with M2 screws, which can be locked onto the panel
Used for connecting USB 3.0 devices, it is backward compatible with USB 2.0
Standard USB3.0 28/28AWG cable with three layers of shielding (one core layer and two outer layers) to prevent signal interference
Other lengths can be customized according to requirements
The USB 3.0-A male terminal can connect to the USB 3.0 vai 2.0 interface of the host. Piemēram, a motherboard or PC card
The USB 3.0 Micro B male terminal can be connected to OTG devices with USB 3.0 vai 2.0 interfaces. Piemēram, hard drive cases, mobile phones